CORDTEX CARBON materials
Prepregs are pre-impregnated materials based on carbon, fiberglass and aramid. Select the structure and binder - we will coordinate the parameters for the molding technology and curing mode.
01 / Catalogue
Start with a material family, then explore specifications and available options.
Aramid base with controlled binder impregnation for lightweight and impact-resistant structures. Select the density, structure and thickness range - the binder system and curing mode will be confirmed by the technologist according to the task.
Combines two or more types of reinforcing fibers in a pre-impregnated matrix. The composition, ratio, structure and binder system are selected for the technical task.
Glass fabric with a pre-applied binder for the production of composites. Select the density of the base - the structure, epoxy system and curing mode will be confirmed by the technologist according to the task.
Carbon fibers are oriented predominantly in one direction and are pre-impregnated with a binder. Select the density of the base - the resin system and batch parameters will be confirmed by the factory.
Pre-bonded carbon fabrics for molding composite parts. Select the warp, weave and density - the resin system and batch parameters will be confirmed by the factory.
Material and ordering
Start with material and dry base weight. Each card distinguishes base and finished prepreg parameters where provided.
Binder and cure cycle are agreed for your process. Programme ranges do not replace a batch specification.
State area, width, forming method and binder requirements. Unknown parameters can be discussed during selection.
No warehouse balance is currently confirmed. Factory manufacture is offered; price, minimum batch, storage and delivery are agreed before ordering.
