Fiberglass prepregs

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-001
CORDTEX CARBON Code: CC-RS-001. Characteristics: curing from 80 °C / 3 hours. Purpose: heat-sensitive cores. Compatibility: confirmed by technologist. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-002
CORDTEX CARBON Code: CC-RS-002. Characteristics: high temperature system. Tg: up to 178 °C according to the factory table. The method for determining Tg requires confirmation. Compatibility: confirmed by technologist.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-003
CORDTEX CARBON Code: CC-RS-003. Characteristics: high temperature system. Tg: up to 200 °C according to the factory table. The method for determining Tg requires confirmation. Compatibility: confirmed by technologist.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-004
CORDTEX CARBON Code: CC-RS-004. Characteristic: ultra-high heat resistance. Tg: 210 °C according to the factory table. The method for determining Tg requires confirmation. Compatibility: confirmed by technologist.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-005
CORDTEX CARBON Code: CC-RS-005. Characteristics: low temperature curing. Purpose: large and thick-walled products. Accurate cycle: confirmed by technologist. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-006
CORDTEX CARBON Code: CC-RS-006. Characteristics: fast curing. Stated mode: 120 °C / 30 min. The mode for the part is confirmed by the technologist. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-007
CORDTEX CARBON code: CC-RS-007. Characteristics: fast curing. Stated mode: 150 °C / 10 min. The mode for the part is confirmed by the technologist. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-008
CORDTEX CARBON Code: CC-RS-008. Characteristics: ultra-fast curing. Stated mode: 140 °C / 6 min. The mode for the part is confirmed by the technologist. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-009
CORDTEX CARBON code: CC-RS-009. Purpose: prepregs of ultra-low surface density. Basis range: confirmed by technologist. Compatibility: checked according to technical brief. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-010
CORDTEX CARBON Code: CC-RS-010. Execution: winter formula. Declared base: standard prepregs 100 and 150 g/m². Compatibility: confirmed by technologist. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-011
CORDTEX CARBON Code: CC-RS-011. Execution: summer formula. Declared base: standard prepregs 100 and 150 g/m². Compatibility: confirmed by technologist. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-012
CORDTEX CARBON Code: CC-RS-012. Characteristics: increased viscosity. Elongation: up to 5% according to the factory table. Impact strength: 72 kJ/m². Methodologies and compatibility are confirmed.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-013
CORDTEX CARBON code: CC-RS-013. Characteristics: transparent system. Purpose: viewing surfaces. The absence of white dots is stated. The result is confirmed on the sample.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-014
CORDTEX CARBON Code: CC-RS-014. Characteristics: transparent system. Claimed: improved processability. The process and appearance are confirmed on the sample. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-015
CORDTEX CARBON Code: CC-RS-015. Characteristic: high transparency. Tg: above 110 °C according to the factory table. The method for determining Tg requires confirmation. Compatibility: confirmed by technologist.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

S1001 binder system
Model: S1001. Type: standard epoxy system. Viscosity: low according to factory classification. Numerical range: confirmed by technologist. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

S3001 binder system
Model: S3001. Type: standard epoxy system. Viscosity: average according to factory classification. Numerical range: confirmed by technologist. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

S5000 binder system
Model: S5000. Viscosity: high according to factory classification. Purpose: universal characteristics. Numerical range: confirmed by technologist. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

S5001 binder system
Model: S5001. Viscosity: high according to factory classification. Purpose: structural and sports products. Compatibility: confirmed by technologist. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system S5001-Y
Model: S5001-Y. Viscosity: high according to factory classification. Version: thixotropic version. The rheology for the process is confirmed. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

S5003 binder system
Model: S5003. Viscosity: high according to factory classification. Characteristics: accelerated reaction. The mode for the part is confirmed by the technologist. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

S5100 binder system
Model: S5100. Viscosity: medium-high according to factory classification. Characteristics: fast curing. Claimed: low resin content. The parameters are confirmed by the technologist.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

S6000 binder system
Model: S6000. Viscosity: ultra-high according to factory classification. Purpose: high modulus fiber. For glass bases, compatibility is not automatically assumed. The decision is made by the technologist.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CFR02-2
Model: CFR02-2. Viscosity: high according to factory classification. Characteristics: high reaction speed. Compatibility: confirmed by technologist. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-016
CORDTEX CARBON Code: CC-RS-016. Viscosity: low according to factory classification. Characteristics: fast curing. Purpose: molded products. The mode is confirmed by the technologist.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

2100 Binder System
Model: 2100. Type: Halogen-free flame retardant system. Source reference: DIN 5510 Series status: withdrawn; relevance is confirmed according to DIN EN 45545. Product conformity is not declared.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-017
CORDTEX CARBON Code: CC-RS-017. Stated: 94V-0. Mode: 150 °C / 5 min. UL 94 V-0: Vertical burning test for plastics. The conformity of the finished product is not declared.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system 2201 100 °C
Model: 2201, 100 °C mode. Declared: EN 45545 R1 HL2. R1: scope of application inside railway transport. HL2: level of fire safety requirements. Product conformity is not declared.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system 2201 120 °C
Model: 2201, 120 °C mode. Declared: EN 45545 R1 HL2. Characteristics: accelerated cycle. HL2: level of fire safety requirements. Product conformity is not declared.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system 2201 150 °C
Model: 2201, 150 °C mode. Declared: EN 45545 R1 HL3. Characteristics: accelerated cycle. HL3: increased level of fire safety requirements. Product conformity is not declared.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

1072 binder system
Model: 1072. Type: halogen fire retardant system. Stated: 94V-0. UL 94 V-0: Vertical burning test for plastics. Product conformity is not declared.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

1076 Binder System
Model: 1076. Type: Halogen-free flame retardant system. Stated: 94V-0. UL 94 V-0: Vertical burning test for plastics. Product conformity is not declared.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

B1280 Binder System
Model: B1280. Type: Halogen-free flame retardant system. Stated: 94V-0. Characteristics: low temperature curing at 80 °C. The mode is confirmed by the technologist.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

1125 binder system
Model: 1125. Features: transparent system. Claimed: high adhesion. Execution: winter version. The result is confirmed on the sample.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

Binder system CC-RS-018
CORDTEX CARBON code: CC-RS-018. Purpose: bases of low surface density. Claimed: reduced halogen content. Basis range: confirmed by technologist. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

1216 Binder System
Model: 1216. Characteristics: high transparency. Claimed: Resistant to yellowing. The appearance is confirmed on the sample. Delivery: upon order from the factory.

Declared characteristics
Description: normalized according to the factory table. Temperature and time: do not replace the process cycle. Viscosity and Purpose: Requires verification on selected basis. Actual parameters are confirmed before ordering.

S1087 binder system
Model: S1087. Type: highly modular system. Resin modulus: about 3.5 GPa according to the factory table. The methodology and compatibility are confirmed. Delivery: upon order from the factory.