CORDTEX CARBONComposite Engineering
full cycle
All prepregs

CORDTEX CARBON materials

Uni-directional prepregs

Carbon fibers are oriented predominantly in one direction and are pre-impregnated with a binder. Select the density of the base - the resin system and batch parameters will be confirmed by the factory.

Choose prepregDiscuss requirements
UNI-DIRECTIONAL PREPREGS

Prepreg catalogue

Choose a specification

Factory programme

Made to order. Price, batch and lead time are agreed for the selected specification.

30 g/m² · CC-PR-U-001dry base 30 g/m² prepreg weight 76 g/m² resin 55% 1000–1250 mm 0.03 mmAvailability and supply options50 g/m² · CC-PR-U-002dry base 50 g/m² prepreg weight 91 g/m² resin 45% 1000–1250 mm 0.06 mmAvailability and supply options75 g/m² · CC-PR-U-003dry base 75 g/m² prepreg weight 121 g/m² resin 38% 1000–1250 mm 0.08 mmAvailability and supply options100 g/m² · CC-PR-U-004dry base 100 g/m² prepreg weight 150 g/m² resin 33% 1000–1250 mm 0.10 mmAvailability and supply options125 g/m² · CC-PR-U-005dry base 125 g/m² prepreg weight 187 g/m² resin 33% 1000–1250 mm 0.13 mmAvailability and supply options150 g/m² · CC-PR-U-006dry base 150 g/m² prepreg weight 224 g/m² resin 33% 1000–1250 mm 0.15 mmAvailability and supply options175 g/m² · CC-PR-U-007dry base 175 g/m² prepreg weight 261 g/m² resin 33% 1000–1250 mm 0.18 mmAvailability and supply options200 g/m² · CC-PR-U-008dry base 200 g/m² prepreg weight 298 g/m² resin 33% 1000–1250 mm 0.20 mmAvailability and supply options225 g/m² · CC-PR-U-009dry base 225 g/m² prepreg weight 337 g/m² resin 33% 1000–1250 mm 0.23 mmAvailability and supply options250 g/m² · CC-PR-U-010dry base 250 g/m² prepreg weight 374 g/m² resin 33% 1000–1250 mm 0.25 mmAvailability and supply options

Material and ordering

How to choose a prepreg

Start with material and dry base weight. Each card distinguishes base and finished prepreg parameters where provided.

Binder and cure cycle are agreed for your process. Programme ranges do not replace a batch specification.

Selection for your process

State area, width, forming method and binder requirements. Unknown parameters can be discussed during selection.

No warehouse balance is currently confirmed. Factory manufacture is offered; price, minimum batch, storage and delivery are agreed before ordering.

Discuss prepreg selection